PT5300 Master Sync Generator

Product Description

MASTER FREQUENCY REFERENCE
27 MHz int. master frequency	better than 0.25 ppm (0-50 °C)
Ageing	<1 ppm/year
ANALOG GENLOCK
Inputs	75 ohm looped through input, or two switchable inputs terminated with 75 ohm (menu configurable)
Input signal	NTSC or PAL black burst, or continuous wave reference signal
Return loss	>36 dB to 6 MHz
Genlock signal	M-NTSC or G-PAL
Amplitude nominal	±3 dB
S/N ratio required	>26 dB
Sc-H phase nominal	±45°
Pull-in range	fsc ±20 Hz
Burst lock jitter	<0.5°
Sync lock jitter	<2 ns
Timing range	±4 field (PAL) ±2 field (NTSC)
Timing resolution	0.5° of subcarrier
Continuous freq. reference	Subcarrier, 5 MHz, and 10 MHz
Amplitude	1 V ±3 dB
ANALOG GENLOCK TRANSPARENT CHANNEL
The analog genlock signal is transferred directly to a transparent output.
Output impedance	75 ohm
Return loss	>36 dB to 6 MHz
HD TRI-LEVEL SYNC OUTPUT
MSG-OPT-8611 quad tri-level sync gen
One module installed in MSG-5300HD
Outputs	4 with independent timing and formats
HD formats	720p, 1080i, 1080p
Connectors	BNC
Output impedance	75 ohm ±1 %
Return loss	>30 dB, up to 30 MHz
Amplitude	600 mVpp ±2 %
Jitter	<0.5 ns
ANALOG BLACK BURST OUTPUTS
Outputs	2 with independent timing and formats
Connector	BNC
Output impedance	75 ohm ±0.5 ohm
Return loss	>36 dB to 5 MHz
Sync amplitude	300 mV ±2 % (PAL) or 286 mV ±2 % (NTSC)
Timing range	±4 fields (PAL) ±2 fields (NTSC
Timing resolution	0.5° of subcarrier
Sc-H phase	Default 0°, adjustment ±180°, resolution <1°
S/N ratio	better than 60 dB unweighted to 5 MHz
Jitter	<±0.5 ns
DUAL AES3 DIGITAL AUDIO GENERATOR
Two independent generators with tone, silence or word clock.
A separate word clock output is available, and a second one can be implemented on request
BNC outputs	2
Single-ended in compliance to AES3id
Output impedance	75 ohm ±20 %
Amplitude	1.0 V ±10 % into 75 ohm
XLR OUTPUT 1 (2)
Balanced in compliance to AES3 1992
Output impedance	110 ohm ±20 %
Amplitude	3 Vpp typical into 110 ohm
Rise and fall times	10-30 ns
Jitter	<20 ns
SIGNAL SPECIFICATION
Sampling frequency	48 kHz
Data rate	3.072 Mbps
Coding	Linear PCM, 20 bit two’s complement binary, bi-phase mark coding
Levels	Silence, 0, -9, -12, -15, – 16, -18, -20 dBFS
Pre-emphasis	None
Outputs signals	Stereo 1 KHz
	Stereo 800 Hz
	Stereo 1 kHz with click in Ch.A
	Stereo 1 kHz with normal click in Ch.A and long click in Ch.B
	Dual 1 kHz in Ch.A and 400 Hz in Ch.B
	Mono 1 kHz
	Mono 1 kHz with click in Ch.A and Ch.B
WORD CLOCK OUTPUT
Single ended BNC
Output impedance	75 ohm ±10 %
Levels:High	>2.3 VLow: <0.2 V into 75 ohm
TTL compatible when single ended
REMOTE CONTROL
The remote interface is configurable, RS-232 or GPI
RS-232 serial interface	SCPI compliant protocol (1995 0)
Baud rate	300 to 9600
Data bits	7 or 8
Parity	None, Odd, or Even
Handshake	XON/XOFF or RTS/CTS
GPI interface	Selection among 6 presets and genlock mode
Interface connector	9 pole female D-Sub, internally configured to serial RS-232C or parallel TTL level ground closure
ETHERNET
Remote control and for optional SNTP server
Connector	RJ45
Speed	10BASE-T
Protocol	Telnet
Network protocol	Static IP or DHCP
MSG-OPT-8612
Quad HD-SD SDI test signal generator
Signals	Video: EBU CB, 75 % CB, 100 % CB, checkfield, PLUGE, window signals, luminance ramp, combination pattern with lip sync
Text	Moving with up to 3 lines of 16 characters inserted in test signals
Audio	Test tones embedded in the SDI signals
HD formats	720p, 1080i, 1080p frame rates are listed in Table 1
SD formats	525 lines and 625 lines
Connectors	BNC, 75 ohm
Output resistance	75 ohm ±1 %
Return loss	>15 dB, up to 1.5 GHz
Amplitude	800 mV ±10 %
Timing range	±1 field
Timing resolution	HD: 6.7 ns (one clock cycle)
SD	37.5 ns
MSG-OPT-8616 GPS GENLOCK AND LTC GENERATOR
GPS active antenna
Impedance	50 ohm
Active amplifier supply voltage	3.3 V
Max. power consumption	0.165 W LTC outputs
Balanced OUT	1 x XLR – OR
Unbalanced OUT	2 x BNC
Output voltage pp	1 Vpp
Output impedance	50 ohm
Timing	±500 ms
Step size	6.7 ns
STABILITY
Accuracy	15 ns
Absolute long term drift	<15 us
(Fixed oscillator, when no GPS contact, 1 hr)
Absolute short term drift	<1 us
(Fixed oscillator, when no GPS contact, 5 min)
SUPPORTED LTC FORMATS
625 lines: 25 FPS (PAL)
24 FPS
525 lines, 29.97 FPS (NTSC – drop frame)
525 lines, 29.97 F (NTSC – non-drop frame)
30 FPS
STANDARD BOOT UP TIME (DEPENDING ON SKY VIEW)
Cold start	44 sec
Warm start	18 sec
CONFIGURATION OF LTC GENERATOR
Time zone select
Selectable switching for daylight saving time
NONE, CONFIRM, AUTO
Individual timing offset for both LTC outputs
±500 ms offset range
MSG-OPT-8643 SNTP SERVER
Stratum level	level 1
Precision	<50 ms
Requests pr. second	max 10
POWER
Voltage	100 – 240 V
Frequency	50 – 100 Hz
Rating	90 W maximum with options
MECHANICAL
1RU x 19 in (483 mm) x 19.3 in (490 mm)
ENVIRONMENTAL
Storage temperature	-20° to 70 °C (-68° to 158 °F)
Operating temperature	5° to 45 °C (41° to 113 °F)
Humidity	Non-condensing (IEC 721)

Features

• Master sync generator and master clock with internal high stability reference that can be locked to the GPS receiver
• Multi-format sync capability: 19 HD formats in addition to PAL, NTSC and standard definition SDI systems
• Two individually timed black burst outputs (up to 6 total)
• Four individually timed tri-level sync outputs for MSG-5300HD (up to 8 total)
• Two AES3 audio generators with one separate word clock output
• Six complete instrument presets are stored for easy switching between application and standards
• Full genlock capability: 1 frame for HD; 2 fields for SDI; 4 and 8 fields for NTSC and PAL
• GPS genlock and LTC generator option
• SNTP server option
• De-embedding and Synchronisation to VITC on Black burst genlock input
• Up to 8 individually timed HD/SD-SDI test signal outputs
• Lip sync moving element in SDI test signals synchronized to embedded audio “click“

User Manual

For detailed performance parameters and technical specifications, refer to PT5300 Users Manual for software version 5.8 and later.