DSA710

DSA710 Spectrum Analyzer

Categories: , .

Product Description

 

rigol-DSA710-3

rigol-DSA7102

rigol-DSA710

DSA700 series is the high-performance compact size and light weight Spectrum Analyser. The frequency range is from 100kHz to 1GHz.The digital IF technology guarantees its reliability and performance to meet the most demanding RF applications.

100 Hz Minimum Resolution Bandwidth
100 Hz Minimum Resolution Bandwidth
With the smallest RBW setting, it is easy to distinguish two nearby signals with the frequency difference of only 100 Hz

Zero Span Function
Zero Span Function
Signal envelope can be seen when demodulating the AM signal with zero span

Peak Table Function
Peak-Table-Function
Readout up to 10 Peak values about Frequency and Amplitude

-130dBm Displayed Average Noise Level (DANL)
Measure-lower-than-130dBm-signal
-130dBm Displayed Average Noise Level (DANL)

-80 dBc/Hz Phase Noise @10 kHz offset
80dBc-Hz-10-kHz-offset-Phase-Noise
With the excellent single sideband phase noise, the nearby small signal can be measured easily

Powerful PC software Option
Powerful-PC-software-Option
With the Ultra Spectrum PC Software, you could remote control and setup all RIGOL Spectrum analyzers, read back the data then do the measurements and data analysis on your PC. It also provides powerful spectrogram and waterfall graph display.

EMI Pre-Compliance Test Software
EMI-Pre-compliance-Test-Software
EMI Pre-Compliance Test Software

Specification

Model MS510S MS520S
Bandwidth(BW) 100MHz 200MHz
Rise time ≤3.5ns ≤3.5ns
Real time sampling rate single channel :1GSa/s,dual-channels:500MSa/s
Memory depth single channel :240Kpts,dual-channels:120Kpts
Isolated channel support
Max waveform capture rate 190,000 wfms/s
Serial bus trigger UART、LIN、CAN、SPI、I2C、1553B、429
Vertical system
Channels 2 oscilloscope channels,1 multimeter channel
Limited bandwidth 20MHz
Coupling modes DC,AC,GND
Input impedance parallel 1MΩ±1% with 15pF±3pF
Vertical sensitivity range 5mV/div~50V/div
Vertical resolution 8bits
Max voltage input 600V CAT Ⅱ   300V CAT Ⅲ
Floating voltage from CHs to GND 1000V CAT Ⅱ   600V CAT Ⅲ
DC vertical gain accuracy 5mV/div~50V/div, 2.0%
Horizontal system
Timebase 4ns/divs~10s/divs
Timebase delay range -12divs~50s
Timebase accuracy 20ppm
Sample mode normal  average, pk-pk envelope
Dynamic record support
Store waveform support internal waveform storage and flash disk storage
Trigger system
Trigger types edge, pulse, logic, vedio （PAL,NTSC,SECAM,720P,1080I,1080P）serial bus（UART、LIN、CAN、SPI、I 2C、1553B、429）
Trigger coupling DC,AC,High-frequency suppression,Low-frequency suppression, Noise suppression
Trigger modes auto, normal, single
Trigger source CH1,CH2,external
Trigger inhibition range 200ns~10s
Measurement
Automatic measurements 31 types
Cursor types horizontal cursor, vertical cursor, cross cursor
Math
Operator  + , - , * , /
FFT window settings Rectangular, Hamming, Blackman-Harris, Hanning
Display features
Display screen 5.7 inch TFT LCD touch screen
Resolution 640*480
3D waveform display not support
Grid of waveform display zone horizontal 12 divs * vertical 8 divs
Format YT mode , XY mode
Interpolation method sin（x）/x
Persist auto, 100ms~10s or ∞
I/O port
Mini USB2.0 connect to  PC
USB2.0 connect to Flash disk
Multimeter
Multimeter type 10 physical measurements ,such as voltage, current, resistance, capacitance, diode , etc
Multimeter accuracy 5000counts
Multimeter display max, average, min, values with time stamp; relative measurement
Data Logger
Logger content

multimeter measurements, oscilloscope measurements, oscilloscope waveforms
Logger timebase multimeter measurements,10s/div ~ 20min/div  
oscilloscope measurements 10s/div ~ 20min/div
oscilloscope waveform 100us/div ~ 2min/div
Logger time length 49s~ ∞
Power
Power adapter input:100-240VAC,50-60HZ,2A; output:12VDC,5A
Battery capacity:7.4V/6000mAh, Work time:4~5 hours
Work environment
Temperature -20℃ ~ +50℃
Humidity < 85%RH
Dimension
Size 254mm*160mm*60mm
Weight main unit: 1380g (no battery),  battery(standard): 276g